Nghia Nail Clippers NC.01

Rreth produktit

How to preserve the product: After using, wipe away dirt Disinfect and sterilize the nipper according to the instructions Dip the nipper blade in anti-rust oil Apply a small amount of oil into the axis to lubricate, wait for about 30 seconds and then open and close the handles for smooth movement.   Use the silicon cap to protect jaw and blades, place the product in the bag/box waiting to be used. Avoid hitting the blade or falling to the ground. Keep out of reach of Children. INSTRUCTIONS FOR STERILIZATION: Cleaning and pre-disinfection solutions can be used with equivalent ingredients: Didecyldimethylammonium chloride, chlorhexidine digluconate. Mix the solution in clean water according to the manufacturer's instructions. Completely soak the product for 15-30 min, with the tip facing up, in the solution. You can use a brush to clean stains on the product. Remove product from solution and rinse thoroughly under running water and dry with a clean cloth. ** NOTE: Because the solution is corrosive, it is necessary to wash at least 2-3 times to remove all the solution from the product. Especially in the rivet and the joint of nippers. Use parchment paper to prevent the product from coming into contact with the metal cage and to absorb remaining moisture from the product (if any). Place the product in the sterilizer at 120°C for 10-20 minutes. Remove the product with tongs or heat-resistant gloves.